Double Stage Extruder For Black Masterbatch
TSE double stage extruder for black masterbatch, if your carbon black percentage under 40%, this line can make good masterbatch, but if your percentage over 40%, you should use Kneader + twin screw extruder . TSE has full experience in this application, each year we sold more than 30 lines for black masterbatch.
Advantages of Our Black Masterbatch Twin Screw Extruder
Good Dispersion and Compounding
Double Stage For Better Pellet
Low Moisture Contains in End Pellet
Easy Operation and More Stable
Main Technical Parameters
| Model | Dia | RPM | L/D | Motor | Output Capacity | |
| TSE/SCE-50/100 | TSE-50 | 21 mm | 500 | 24-48 | 45 kw | 100-350 kg/h |
| SCE-100 | 100 mm | 85 | 7-20 | 30-37kw | ||
| TSE/SCE-65/150 | TSE-65 | 62.4mm | 500 | 24-48 | 75 kw | 200-500 kg/h |
| SCE-150 | 150 mm | 85 | 7-20 | 37-45 kw | ||
| TSE/SCE-75/180 | TSE-75 | 71 mm | 500 | 24-48 | 110 kw | 400-800 kg/h |
| SCE-180 | 180 mm | 85 | 7-20 | 45-55 kw | ||
| TSE/SCE-95/200 | TSE-95 | 93 mm | 400 | 24-48 | 200-250 kw | 700-1500 kg/h |
| SCE-200 | 200 mm | 85 | 7-20 | 55-75 kw | ||
Cutting Types
There are 5 different cutting types for different application.According to your raw materials, We can customize the best solution for your business.
Water-cooling Strands Cutting Type
Air-cooling Hot-face cutting type
Water-ring Hot-face cutting type
Air-cooling Strands Cutting type
UnderWater Cutting Type
